---
title: "Cube-Out vs Weigh-Out: Which Limit Stops Your Container First?"
description: "Balanced density per container — about 1.0 t/m³ in a 20GP, 0.46 in a 40GP, 0.39 in a 40HC — why timber sometimes fills by volume and sometimes by weight, with worked examples."
image: "https://nestingcalc.com/og-default.png"
url: "https://nestingcalc.com/guides/container-loading-cube-out-weigh-out/"
locale: "en"
---

# Cube-Out vs Weigh-Out: Which Limit Stops Your Container First?

Balanced density per container — about 1.0 t/m³ in a 20GP, 0.46 in a 40GP, 0.39 in a 40HC — why timber sometimes fills by volume and sometimes by weight, with worked examples.

## Two ceilings on every load

Every container shipment hits one of two limits first. **Cube-out**: the space is full before the weight limit. **Weigh-out**: the payload limit is hit with space to spare. The decider is balanced density — payload divided by usable volume — compared against your cargo's density. Cargo denser than balanced density weighs out; lighter cargo cubes out.

## Container reference table

| Type | Nominal | Usable | Payload | Balanced density |
| --- | --- | --- | --- | --- |
| 20GP | 33.2 m³ | ≈ 28 m³ | 28,200 kg | ≈ 1.01 t/m³ |
| 40GP | 67.7 m³ | ≈ 58 m³ | 26,700 kg | ≈ 0.46 t/m³ |
| 40HC | 76.4 m³ | ≈ 68 m³ | 26,500 kg | ≈ 0.39 t/m³ |

Carrier and route rules often cap payload below the plate value, so treat these as the tool's editable starting points, not gospel.

## Timber cargo: which limit wins?

Kiln-dried pine lumber at 450–500 kg/m³ sits right at a 40GP's balanced density — one extra bundle decides between cube-out and weigh-out. Green hardwood at 950–1,150 kg/m³ weighs out a 20GP after roughly 24–28 m³. Plywood (500–600 kg/m³) fills a 40HC by volume; loose chips (250–350 kg/m³) always cube out. The same product can flip limits with moisture alone.

## Worked example

Sawn pine at 470 kg/m³ into a 40GP: 58 m³ usable × 470 = 27.3 t — over the 26,700 kg payload, so the load **weighs out**: max volume = 26,700 ÷ 470 ≈ 56.8 m³. The same pine into a 20GP: 28 m³ × 470 = 13.2 t, far under 28,200 kg — the box **cubes out** at 28 m³. Two containers, same cargo, two different binding constraints.

## Practical checks before the truck leaves

Road limits at both ends are usually tighter than the container plate — verify axle and gross weights for the destination country. Heavy bundles raise floor-load questions (kg per m²) and weight-distribution rules (≈ 60/40 front/rear). Dunnage and lashing cost volume: budget 5–10% of the cube. [Container loading](https://nestingcalc.com/container-loading-calculator/) computes fill volume, weight and flags which limit binds; the sea-leg view continues in [Stowage Factor for Timber Cargo: IMO Ranges and How to Use Them](https://nestingcalc.com/guides/stowage-factor-timber-cargo/).

[Container loading](https://nestingcalc.com/container-loading-calculator/) [Open the linear cutting calculator](https://nestingcalc.com/linear-cutting-calculator/)

```json
[{"@context":"https://schema.org","@type":"Organization","@id":"https://nestingcalc.com/#organization","name":"NestingCalc","url":"https://nestingcalc.com/","description":"Free cutting optimizer & nesting calculators","logo":"https://nestingcalc.com/logo-512.png"},{"@context":"https://schema.org","@type":"WebSite","@id":"https://nestingcalc.com/#website","name":"NestingCalc","url":"https://nestingcalc.com/","inLanguage":"en","publisher":{"@id":"https://nestingcalc.com/#organization"}},{"@context":"https://schema.org","@type":"BreadcrumbList","itemListElement":[{"@type":"ListItem","position":1,"name":"NestingCalc","item":"https://nestingcalc.com/"},{"@type":"ListItem","position":2,"name":"Guides & Articles","item":"https://nestingcalc.com/guides/"},{"@type":"ListItem","position":3,"name":"Cube-Out vs Weigh-Out: Which Limit Stops Your Container First?","item":"https://nestingcalc.com/guides/container-loading-cube-out-weigh-out/"}]}]
{"@context":"https://schema.org","@type":"Article","@id":"https://nestingcalc.com/guides/container-loading-cube-out-weigh-out/#article","mainEntityOfPage":"https://nestingcalc.com/guides/container-loading-cube-out-weigh-out/","headline":"Cube-Out vs Weigh-Out: Which Limit Stops Your Container First?","description":"Balanced density per container — about 1.0 t/m³ in a 20GP, 0.46 in a 40GP, 0.39 in a 40HC — why timber sometimes fills by volume and sometimes by weight, with worked examples.","inLanguage":"en","image":"https://nestingcalc.com/og-default.png","author":{"@id":"https://nestingcalc.com/#organization"},"publisher":{"@id":"https://nestingcalc.com/#organization"},"datePublished":"2026-09-05","dateModified":"2026-10-02"}
```